IMPATT diode means Impact Ionization Avalanche Transit Time Diode.
Its operation depends on the reverse breakdown voltage characteristics of p-n junction and phase delay of the applied RF signal.
1.Mechanism of Oscillation of IMPATT Diode
In a diode resonator circuit, noise voltage excites resonant component. The reverse biased d.c. field and a.c. field make the diode to swing into and out of the avalanche condition. The carriers drift to the end contacts before the diode swings out of the avalanche region. This happens as the hole drift time is very short. As a result, the a.c. field takes energy from the carriers or d.c. bias source. This process builds the microwave oscillations in the circuit.
The frequency of oscillations is given by
Here, v = Drift velocity of the holes.
l = Length of the drift region.
2.Principle of Operation of IMPATT Diode
It is basically a p-n junction diode and is reverse biased to breakdown. In this, an avalanche of electron-hole pairs are created by impact ionization in the high field depletion layer of the device. The oscillations are produced by the transit of the field carriers through the depletion layer.
The negative resistance of IMPATT diodes is due
to the impact ionization and the transit time effects.
The IMPATT diode and avalanche pulse are shown in Fig. 1.
The transit angle is given by,
Here, Ԏ = Transit time.
ω = 2πf,
The avalanche resonant frequency is given by
Here, A = Diode cross section
I = Current.
εs = Semiconductor permittivity.
α = Ionization coefficient.
α= ∂α/∂ε
The IMPATT diode is characterized by an impedance consisting of both resistive and reactive parts. The resistive part Rd is given by
Here, Rp = Resistance of inactive region.
In terms of transit time, the frequency of the diode is given by
Here, Ԏ = Transit time.
3. V-I Characteristics of IMPATT Diode
The V-I characteristics are shown in Fig 2.
4. Efficiency of IMPATT Diode
It is given by
5. Salient Features of IMPATT Diode
. It is an avalanche transit time device.
. It can be made with germanium, silicon and gallium arsenide.
. It is useful upto 100 GHz.
. It provides highest continuous power compared to other semiconductor devices.
. Its efficiency is less than 30%.
. It is useful at microwave, millimeter and submillimeter wave frequencies.
. IMPATT diodes are popularly used in digital and analog communication and radar systems.
. It can be used as an amplifier and an oscillator.
6. Equivalent Circuit of Impact Diode
An equivalent circuit of IMPATT diode is shown in Fig 3.
In this circuit,
The load impedance is given by
In the diode mount, the reactance of the circuit is made zero by controlling the inductance. In the circuit.
Rmd = Diode negative resistance
Cj = Junction capacitance
Lp = Package lead inductance.
Cp = Capacitance between package terminals.
RL = Loads resistance.
Quarter wave transformer is used tomatch the low resistance diode with the load.
7. Applications of IMPATT Diode
It is used
. as microwave oscillator..as modulated oscillator.
. as receiver local oscillator.
. as parametric amplifier pump.
. in radar reception..in communication transmission.
. as negative resistance amplifier.
8. Advantages of IMPATT Diode
. Wideband
. Pulse power is high
. Suitable for high frequency use
9. Disadvatages of IMPATT Diode
. Noise device
. Tuning range is not high
. Noise Figure is high and is about 80 DB